Difference between revisions of "GameCube EXI-to-USB Adapter"

From Rare Gaming Dump
m (Lavacakes moved page gameCube EXI-to-USB Adapter to GameCube EXI-to-USB Adapter over redirect)
 
(12 intermediate revisions by 4 users not shown)
Line 1: Line 1:
{{stub}}
+
[[File:EXI2USB.jpg|thumb|right|The official Nintendo EXI-to-USB adapter for GameCube released to third parties]]
  
The '''Waikiki''' is believed to be a debugging device made by Nintendo. This is the official version of what became a USB Gecko, which later was picked up by someone to make what they called a Shuriken USB. Waikiki is named after [https://en.wikipedia.org/wiki/Waikiki a neighborhood in Honolulu, Hawaii], possibly due to the high presence of ''Dolphins'' there.
+
The '''GameCube EXI-to-USB Adapter''' (officially known just as the "USB-ADAPTER") is used for debugging GameCube and Wii software. The adapter has an end which plugs into the GameCube/Wii's EXI bus via the memory card slot, which then allows for a USB cable to be plugged in which can interface with special PC software to provide debug functionality.
  
The Waikiki dongle was used during internal "lab testing", as well as factory initialization, of the Wii and possibly the GameCube. [[RVL_AGING]] contains a program used to test the Waikiki's operations.
+
The homebrew community has produced multiple recreations of this device under the name "USB Gecko" and later "Shuriken USB", however they are no longer in production and are now difficult and expensive to find due to a shortage of parts.
 +
 
 +
== See also ==
 +
 
 +
* [[Waikiki]]
 +
{{Template:WiiNavbox}}
 +
{{Template:GamecubeNavbox}}
 +
 
 +
[[Category:GameCube]]
 +
 
 +
[[Category:Wii]]
 +
 
 +
[[Category:Development]]
 +
 
 +
[[Category:Development Peripherals]]

Latest revision as of 18:35, 3 March 2021

The official Nintendo EXI-to-USB adapter for GameCube released to third parties

The GameCube EXI-to-USB Adapter (officially known just as the "USB-ADAPTER") is used for debugging GameCube and Wii software. The adapter has an end which plugs into the GameCube/Wii's EXI bus via the memory card slot, which then allows for a USB cable to be plugged in which can interface with special PC software to provide debug functionality.

The homebrew community has produced multiple recreations of this device under the name "USB Gecko" and later "Shuriken USB", however they are no longer in production and are now difficult and expensive to find due to a shortage of parts.

See also