673
edits
Changes
From Rare Gaming Dump
mLine 1:
Line 1: − {{stub}}+ − == Software ==+ − [[NWC24Editor]] − + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
Lavacakes moved page wii Development Hardware to Wii Development Hardware over redirect: cleanupCaps.php is retarded
This page describes various hardware used for Wii game and system development.
This page is only meant to provide a brief summary of each; more information is available at each individual page.
== Hardware ==
"Wired" model development hardware only supports Bluetooth (Wii Remote connectivity) over an RF cable.
==NDEV (Wired/Wireless)==
''Main article'': [[NDEV]]
The NDEV is the main development system for the Wii. It has expanded RAM and only loads games from a host PC over an optical disc emulation interface; there is no disc drive or hard drive.
==RVT-R Reader (Wired/Wireless)==
''Main article'': [[RVT-R Reader]]
The RVT-R Reader is similar to a retail Wii unit, but reads RVT-R Discs instead of retail Wii discs ([[RVL-ROM]]).
==RVT-H Reader (Wired/Wireless)==
''Main article'': [[RVT-H Reader]]
The RVT-H Reader is a Wii with expanded RAM and an internal hard drive replacing the optical disc drive, with a built-in optical disc emulation interface.
==RVT-R Writer==
''Main article'': [[RVT-R Writer]]
The RVT-R Writer is a special DVD burner used to write [[RVT-R Disc|RVT-R Discs]].
==RVT-R Discs==
''Main article'': [[RVT-R Disc]]
RVT-R Discs are recordable discs which are readable in [[RVT-R Reader]] units.
== Hudson NNGC I/O Board ==
''Main article'': [[Revolution Emulator]]
The Hudson [[NNGC]] I/O Board is an optical disc emulation board which can be used with GameCube development hardware ([[GDEV]]/[[TDEV]]); when used with the [[IOS]] emulator, it forms the "Revolution Emulator" development environment.
== ARM Versatile ==
[https://elinux.org/ARM_Versatile ARM Versatile] boards have been used by [[BroadOn]] to test the [[IOP]] standalone.
== Broadway Evaluation Board (BEB) ==
The BEB is a board used to evaluate early [[Broadway]] samples before the [[Hollywood]] was ready.
==Wired Wii Remote==
''Main article'': [[Wii Remote]]
The Wii Remote is available in a wired version for development purposes. Additionally, there were several prototype versions of the Wii Remote included in various development kits; more information is available on the main article.
==RF Splitter==
The RF Splitter is used to connect up to 4 Wired Wii Remotes to one development kit which only has 1 RF cable port (all development kits have this limitation except for NDEV prototypes).
==Waikiki==
''Main article'': [[Waikiki]]
The Waikiki is a serial-to-USB adapter used over the [[EXI]] interface (typically the Memory Card Slot B). It was used internally by Nintendo for system development and [[Wii Factory Process|factory]] purposes.
==Barnacle(2)==
''Main article'': [[Barnacle]]
The Barnacle (and Barnacle2) are devices which provide bootstrap code for the [[Gekko]]/[[Broadway]] by emulating the console's bootrom over the EXI interface. These were used for internal system development only.
==NR Checker==
The NR Checker is a device which connects to a GameCube controller port on the Wii and can be used to activate certain functionality (such as allowing repair programs to run or the [[Wii System Menu]]'s recovery mode). The check for this device typically appears to be a check for a GameCube controller with all 4 D-pad buttons held down (this is normally impossible without a modified controller).
<br />{{Template:WiiNavbox}}
[[Category:Wii]]
[[Category:Development]]
