Changes

no edit summary
Line 1: Line 1: −
{{Template:WIP}}
+
This page describes various hardware used for Wii game and system development.
   −
== Software ==
+
This page is only meant to provide a brief summary of each; more information is available at each individual page.
   −
[[Revolution SDK]]
+
"Wired" model development hardware only supports Bluetooth (Wii Remote connectivity) over an RF cable.
   −
[[Wii Menu Changer]]
+
== NDEV (Wired/Wireless) ==
 +
''Main article'': [[NDEV]]
   −
[[Wii Menu Uninstaller]]
+
The NDEV is the main development system for the Wii. It has expanded RAM and only loads games from a host PC over an optical disc emulation interface; there is no disc drive or hard drive.
   −
[[DiskCheck]]
+
== RVT-R Reader (Wired/Wireless) ==
 +
''Main article'': [[RVT-R Reader]]
   −
[[Nmenu]]
+
The RVT-R Reader is similar to a retail Wii unit, but reads RVT-R Discs instead of retail Wii discs ([[RVL-ROM]]).
   −
[[Revolution Emulator]]
+
== RVT-H Reader (Wired/Wireless) ==
 +
''Main article'': [[RVT-H Reader]]
   −
[[Prototype Revolution SDK]]
+
The RVT-H Reader is a Wii with expanded RAM and an internal hard drive replacing the optical disc drive, with a built-in optical disc emulation interface.
   −
[[NWC24Editor]]
+
== RVT-R Writer ==
 +
''Main article'': [[RVT-R Writer]]
   −
== Hardware ==
+
The RVT-R Writer is a special DVD burner used to write [[RVT-R Disc|RVT-R Discs]].
[[NDEV]]
     −
[[RVT-R Reader]]
+
== RVT-R Discs ==
 +
''Main article'': [[RVT-R Disc]]
   −
[[RVT-R Writer]]
+
RVT-R Discs are recordable discs which are readable in [[RVT-R Reader]] units.
   −
[[RVT-H Reader]]
+
== Wired Wii Remote ==
 +
''Main article'': [[Wii Remote]]
   −
[[Pre-Production Boards]]
+
The Wii Remote is available in a wired version for development purposes. Additionally, there were several prototype versions of the Wii Remote included in various development kits; more information is available on the main article.
   −
[[Wii Remote]] (under the development/prototype sections)
+
== RF Splitter ==
 +
The RF Splitter is used to connect up to 4 Wired Wii Remotes to one development kit which only has 1 RF cable port (all development kits have this limitation except for NDEV prototypes).
   −
{{Template:WiiNavbox}}
+
== Waikiki ==
 +
''Main article'': [[Waikiki]]
 +
 
 +
The Waikiki is a serial-to-USB adapter used over the [[EXI]] interface (typically the Memory Card Slot B). It was used internally by Nintendo for system development and [[Wii Factory Process|factory]] purposes.
 +
 
 +
== Barnacle(2) ==
 +
''Main article'': [[Barnacle]]
 +
 
 +
The Barnacle (and Barnacle2) are devices which provide bootstrap code for the [[Gekko]]/[[Broadway]] by emulating the console's bootrom over the EXI interface. These were used for internal system development only.
 +
 
 +
== NR Checker ==
 +
The NR Checker is a device which connects to a GameCube controller port on the Wii and can be used to activate certain functionality (such as allowing repair programs to run or the [[Wii System Menu]]'s recovery mode). The check for this device typically appears to be a check for a GameCube controller with all 4 D-pad buttons held down (this is normally impossible without a modified controller).
 +
<br />{{Template:WiiNavbox}}
    
[[Category:Wii]]
 
[[Category:Wii]]
    
[[Category:Development]]
 
[[Category:Development]]